40808 Media Handler MDH: Unload table rotate position sensor is already high (sensor may be broken) This error is reported if the rotator position sensor reports TRUE before the unload table cups are moved to the rotate position. This probably means that the rotator position sensor has failed or has been broken. Use the <<table>> command to check the rotate position sensor. The Rotate Position sensor should read True only when the traveller is in the center of the table; False all other times. The name of the sensor is AL_SensorTravellerRotate. It is possible to bypass the sensor temporarily with the <<scan>> command. None. A device error has occurred: You may be able to continue by pressing the "resume" button onscreen (if present) or by resetting the device and workstation. For support under your service contract, contact the Creo Response Center at 1-(800) 472-2727 or online at http:\\eCentral.creo.com (or your local service representative) To speed troubleshooting, please make a note of error numbers, the media type/size and any information about the workflow or job that might be relevant. This error is reported. Faulty/broken sensor. Faulty wiring. 06-MAR-2002 ..\..\ShowAllErrors.htmFirmware 1 Error Index ..\..\ShowAllCommands.htmFirmware 1 Command Index ..\..\ShowAllParameters.htmFirmware 1 Parameter Index Updated: Thu Jul 17 07:23:31 2008 PST